Triumph Tiger 800 motorcycle webpage header

 

Motorcycle Supplies

 

2010-2013 Triumph Tiger 800 Introduction

The Triumph Tiger 800 is manufactured in Hinckley, England by Triumph Motorcycles. It was first produced in 2010. Triumph proudly took inspiration from their smaller Daytona 675 model.

Triumph have since released two siblings to the Tiger 800 dual sport 799cc. A road-oriented Tiger XR model and an off-road Tiger XC model.

The original silver paintwork on the frame was changed to black in 2012. With the exception of the red framed special edition XC and XR models.

Triumph claimed a 17% improvement in fuel economy in the 2015 with the second generation engine. Fitted with a 'drive by wire' throttle. At this time, traction control was included as standard.

 
 

2010-2013 Triumph Tiger 800 Full Specifications

Get to know the 2010-2013 Triumph Tiger 800 in exquisite detail with our meticulously crafted motorcycle specifications tables.

Click or tap on a navigation pane below to find your way through our highly detailed, categorised 2010-2013 Triumph Tiger 800 specifications.

 

2010-2013 Triumph Tiger 800 Dimensions Specifications Table

AttributeValue
Overall length2,215 mm
Overall width795 mm
Overall height1,350 mm
Wheelbase1,530 mm
Seat height813 mm
Wet weight210 kg (fuel and fluids)
Maximum payload225 kg (rider, passenger, luggage and accessories)
 

2010-2013 Triumph Tiger 800 Frame Specifications Table

AttributeValue
Frame typeSteel trellis
Rake / Caster angle23.9 °
Trail length94.4 mm
 

2010-2013 Triumph Tiger 800 Engine Specifications Table

AttributeValue
Power70 kW @ 9,300 rpm (95 PS / 94 bhp)
Torque79 Nm @7,850 rpm (58 Ib-ft)
Engine capacity / displacement800 cc
Engine configuration3 Cylinder 12 valve DOHC
ArrangementTransverse in-line
Bore and Stroke74 x 61.94 mm
Compression ratio11.1 : 1
Cylinder numbering / sequencingLeft to Right, no. 1 @ left (no. 3 adjacent to camchain)
Flying order1 - 2 - 3
 

2010-2013 Triumph Tiger 800 Cylinder Head Specifications Table

AttributeValue
Valves per cylinder4 valves
Intake valve seat angle45.25 °
Intake valve seat width0.80 mm - 1.20 mm
1.50 mm (service limit)
Exhaust valve seat angle45.25 °
Exhaust valve seat width1.00 mm - 1.40 mm
1.70 mm (service limit)
 

2010-2013 Triumph Tiger 800 Valves and Springs Specifications Table

AttributeValue
Intake valve clearance0.10 mm - 0.20 mm
Intake valve lift25.50 mm
Intake valve stem diameter3.975 mm 3.990 mm
3.965 mm (service limit)
Intake valve guide diamater4.000 mm - 4.015 mm (bore)
Intake valve guide diameter4.043 mm (bore service limit)
Intake valve stem to guide clearance0.010 mm - 0.040 mm
0.078 mm (service limit)
Intake valve seat angle45.25 °
Intake valve head diameter30.50 mm
Intake valve seat width0.80 mm - 1.20 mm
1.50 mm (service limit)
Exhaust valve clearance0.325 mm - 0.375 mm
Exhaust valve lift7.25 mm
Exhaust valve stem diameter3.955 mm - 3.970 mm
3.965 mm (service limit)
Exhaust valve guide diameter4.000 mm - 4.015 mm (bore)
4.043 mm (bore service limit)
Exhaust valve stem to guide clearance0.030 mm - 0.060 mm
0.098 mm (service limit)
Exhaust valve seat angle45.25 °
Exhaust valve head diameter25.50 mm
Exhaust valve seat width1.00 mm - 1.40 mm
1.70 mm (service limit)
 

2010-2013 Triumph Tiger 800 Valve Train Specifications Table

AttributeValue
TypeDOHC
Intake valve bucket diameter24.415 mm 25.435 mm (bore)
25.449 mm (bore service limit)
25.380 mm - 25.406 mm (outer)
25.368 mm (outer service limit)
Exhaust valve bucket diameter24.415 mm - 25.435 mm (bore)
25.449 mm (bore service limit)
25.380 mm - 25.406 mm (outer)
25.368 mm (outer service limit)
 

2010-2013 Triumph Tiger 800 Camshaft and Timing Specifications Table

AttributeValue
Intake valve cam timingopens @ 5.18° BTDC @ 1.0 mm lift
closes @ 25.18° ABDC @ 1.0 mm lift
210.36 ° open duration
Exhaust valve cam timingopens @ 37.27° BBDC @ 1.0 mm lift
closes @ 3.27° ATDC @ 1.0 mm lift
220.53 ° open duration
Camshaft journal diameter23.940 mm - 23 .960 mm (outer)
24.000 mm - 24.021 mm (bore)
Camshaft journal clearance0.040 mm - 0.081 mm
0.130 mm (service limit)
Camshaft end float0.23 mm 0 0.33 mm
0.40 mm (service limit)
Camshaft run-out0.015 mm (service limit)
 

2010-2013 Triumph Tiger 800 Crankshaft Specifications Table

AttributeValue
Crankshaft big end journal diameter32.984 mm - 33.000 mm
32.960 mm (service limit)
Crankshaft big end bearing clearance0.035 mm - 0.065 mm
0.070 mm (service limit)
Crankshaft main bearing journal diameter32.984 mm - 33.000 mm
32.960 mm (service limit)
Crankshaft main bearing clearance0.020 mm - 0.044 mm
0.070 mm (service limit)
Crankshaft end float0.15 mm - 0.30 mm
Crankshaft run-out0.05 mm (service limit)
 

2010-2013 Triumph Tiger 800 Cylinder and Piston Specifications Table

AttributeValue
Cylinder bore diameter74.040 mm - 74.060 mm (bore)
74.150 mm (bore service limit)
Gudgeon pin bore diameter in piston16.004 mm 16.012 mm
16.040 mm (service limit)
Gudgeon pin diameter15.995 mm - 16.000 mm (outer)
15.985 mm (outer service limit)
Top piston ring to groove clearance0.02 mm - 0.06 mm
0.075 mm (service limit)
Second piston ring to groove clearance0.02 mm - 0.06 mm
0.075 mm (service limit)
Top piston ring end gaps0.15 mm - 0.30 mm
0.60 mm (service limit)
Second piston ring end gaps0.30 mm - 0.45 mm
0.75 mm (service limit)
Piston ring oil end gaps0.20 mm - 0.70 mm
Connecting rod small end diameter16.016 mm - 16.029 mm (inner)
16.039 mm (inner service limit)
Connecting rod big end side clearance0.15 mm - 0.30 mm
0.50 mm (service limit)
 

2010-2013 Triumph Tiger 800 Clutch and Primary Drive Specifications Table

AttributeValue
Primary Drive typeGear
Reduction ratio1.667 : 1 (85 / 51)
Clutch typeWet, multi-plate
Clutch actuation methodCable
Clutch park height42.20 mm (+ 0.34 mm / - 0.66 mm) mm
Number of friction plates9
Friction plate thickness3.00 mm
2.80 mm (service limit)
 

2010-2013 Triumph Tiger 800 Transmission Specifications Table

AttributeValue
Type6 Speed, Constant Mesh
Gear ratio1st gear = 2.313 : 1 (37/16)
2nd gear = 1.857 : 1 (29/21)
3rd gear = 1.500 : 1 (36/24)
4th gear = 1.285 : 1 (27/21)
5th gear = 1.136 : 1 (25/22)
6th gear = 1.043 : 1 (24/23)
Gear selector fork / claw thickness5.9 mm - 6.0 mm
Gear selector fork /claw thickness5.80 mm (service limit)
 

2010-2013 Triumph Tiger 800 Final Drive Specifications Table

AttributeValue
Final driveChain
Final drive ratio3.125 : 1 (50 / 16)
Chain typeRK O-ring
Number of chain links122 links
Length of 10 links159.5 mm
Drive chain play15 mm - 25 mm
 

2010-2013 Triumph Tiger 800 Lubrication Specifications Table

AttributeValue
System typePressure lubrication, Wet sump
Oil capacity3.75 litres (dry fill)
3.6 litres (wet fill, includes filter)
3.4 litres (wet fill, excludes filter)
Recommended oil approval ratingAPI SH (or higher) and JASO MA
Oil viscosity10w/40 or 10W/50
Oil typesemi or fully synthetic
Oil pump rotor tip clearance0.15 mm
0.20 mm (service limit)
Oil pump body clearance0.15 mm - 0.22 mm
0.35 mm (service limit)
Oil pump rotor end float0.04 mm - 0.09 mm
0.17 mm (service limit)
 

2010-2013 Triumph Tiger 800 Cooling System Specifications Specifications Table

AttributeValue
Coolant mixture50 / 50 (pre-mixed as supplied by Triumph)
Anti-freeze typeTriumph HD4X Hybrid OAT coolant
Freezing point- 35 ℃
Coolant system capacity2.4 litres
Cooling fan temperatureswitches ON @ 103 ℃
Temperature gauge sensor resistance2.3 KΩ - 2.6 KΩ @ 20 ℃
 

2010-2013 Triumph Tiger 800 Fuel System Specifications Table

AttributeValue
Fuel typeUnleaded, 91 RON (U.S. 87 CLC/AKI)
Fuel tank capacity19 litres
Low level warning lamp4 litres remaining
Fuel pump typeSubmerged
Purge control systemElectronic, via fuel system ECU
 

2010-2013 Triumph Tiger 800 Fuel Injection System Specifications Table

AttributeValue
TypeElectronic, sequential
Idle speed1,100 rpm
Injector typeTwin jet, solenoid operated plate valve
ThrottleCable / twist grip / electronic throttle potentiometer
Control sensorsBarometric pressure, throttle position, coolant temperature, crankshaft position, vehicle speed, lambda sensor, intake air temperature, gear position, MAP
 

2010-2013 Triumph Tiger 800 Emissions Controls Specifications Table

AttributeValue
Catalysts1, in down pipe
Oxygen sensorHeated, in down pipe
Evaporative controlActivated carbon canister (Certain markets only)
 

2010-2013 Triumph Tiger 800 Ignition System Specifications Table

AttributeValue
TypeDigital Inductive
Electronic rev limiter10,000 rpm
Ignition coil typePlug-top
Spark plug typeNGK CR9EK
Spark plug gap0.7 mm
 

2010-2013 Triumph Tiger 800 Front Suspension and Steering Specifications Table

AttributeValue
Front axel travel180 mm
Recommended front fork oil gradeShowa SS 8
Oil level103 mm (fork fully compressed, sping removed)
Oil volume553 ml (dry fill)
Fork pull through4 mm (above top yoke)
 

2010-2013 Triumph Tiger 800 Rear Suspension Specifications Table

AttributeValue
Rear axel travel170 mm
Rear suspension bearing greaseGrease to NLGI 2 specification
 

2010-2013 Triumph Tiger 800 Front Brake Specifications Table

AttributeValue
Front brake typeTwo hydraulically actuated twin piston sliding calipers acting on twin dics
Front disc diameter305 mm
Front disc thickness4.5 mm
4.0 mm (service limit)
Front disc run-out0.15 mm (service limit)
Recommended front brake fluidDOT 4 Brake and Clutch Fluid
Front master cylinder diameter14.00 mm (inner)
Front caliper cylinder A diameter2 x 27.00 mm (inner service limit)
 

2010-2013 Triumph Tiger 800 Rear Brake Specifications Table

AttributeValue
Rear brake typeHydraulically actuated single piston caliper, single disc
Rear disc diameter255 mm
Rear disc thickness6.0 mm
5.5 mm (service limit)
Rear disc run-out0.5 mm (service limit)
Recommended rear brake fluidDOT 4 Brake and Clutch Fluid
Rear master cylinder diameter12.7 mm (inner)
Rear caliper piston A diameter38.18 mm (outer)
 

2010-2013 Triumph Tiger 800 Wheels and Tyres Specifications Table

AttributeValue
Front wheel sizeMT 2.5 x 17 inch
Front tyre size100 / 90 - 19
Front tyre pressure36 psi (cold)
Recommended front tyrePirelli Scorpio Trail
Front wheel rim axial run-out0.5 mm (service limit)
Front wheel rim radial run-out0.5 mm (service limit)
Rear wheel sizeMT 4.25 x 17 inch
Rear tyre size150 / 70 - 17
Rear tyre pressure42 psi (cold)
Recommended rear tyrePirelli Scorpion Trail
Rear wheel rim radial run-out0.5 mm (service limit)
Rear wheel rim axial run-out0.5 mm (service limit)
 

2010-2013 Triumph Tiger 800 Electrical Charging Specifications Table

AttributeValue
Battery typeYTX - 16BS
Battery voltage rating12 volts DC
Battery capacity14 ampere hour (Ah)
 

 

 

Learn more about motorcycles...

As we grow our data we'll be creating neat little tools to collate and display the data you want to see, how you want to see it. There may even be an opportunity to compare different bikes against any of our detailed specifications. Hint, hint.

Want to learn more about Triumph motorcycles? Don't miss our Triumph motorcycle library.

Are you in search of another bike manufacturer? Our library includes data from a growing range of other motorcycle manufacturers too.

If you think we’re missing something, or you've got valuable expertise working on the 2010-2013 Triumph Tiger 800, please give us a shout. We're ambitious in our plans to share knowledge about everything motorcycle. So, if you've something to contribute, please don't hesitate to reach out to us here.  

 

Haynes Manuals

Haynes Motorcycle manuals - Written especially for us bike builders  

Leave a Reply

Your email address will not be published. Required fields are marked *

 

Motorcycle Supplies